Alcatel-Lucent OmniAccess 5740 - Bgp Dampening

bgp dampening
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
499
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
BGP DAMPENING
bgp dampening <1-45> <1-20000> <1-20000> <1-255> [route-map
<name>
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command enables BGP route-flap dampening and changes various BGP
route dampening factors.
PARAMETERS
DEFAULT VALUE
Disabled by default.
EXAMPLE
ALU(config-router bgp AS30)# bgp dampening 2 200 200 20
Parameter Description
1-45 Time (in minutes) after which a penalty is decreased. If a
penalty has been assigned to the route, this penalty is
decreased by half after the half-life period.
The default value is 15 minutes. The process of reducing
the penalty happens every 5 seconds.
1-20000 Value (in seconds) to start reusing a route.
1-20000 Value (in seconds) to start suppressing a route.
1-255 Maximum duration (in minutes) to suppress a stable route.
name Name of route map that controls BGP route dampening.