Alcatel-Lucent OmniAccess 5740 - Gre-Keep-Alive-Max-Tries

gre-keep-alive-max-tries
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
867
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
GRE-KEEP-ALIVE-MAX-TRIES
gre-keep-alive-max-tries <1-100>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the maximum number of keep alive messages to be sent.
PARAMETERS
DEFAULT VALUE
The default keepalive max-tries is 3.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# gre-keep-alive-max-tries 10
RELEASE HISTORY
Release 2.3.2: command was introduced.
Parameter Description
1-100 Specifies the maximum number of GRE
keep alive messages to be sent.