ip route
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
647
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP ROUTE
ip route [vrf <vrf-name>] {destination network subnet-
mask|destination network/prefix-length} {<gateway-ip-
address>|<interface-name> [<gateway-ip-address>]}[<1-255>]
DESCRIPTION
This command is entered in the Configuration Mode. This command adds a static
routing entry into the specified VRF routing table. If the VRF name is not specified,
then the routing entry is added to the corresponding Default VRF’s routing table.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip route vrf ALU-vrf 1.1.1.0/24 2.2.2.2
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name The name of the VRF for which the routing
entry is to be added.
{destination network
subnet-mask|destination
network/prefix-length}
The IP address and prefix length of the
destination.
gateway-ip-address IP address of the next hop.
interface name Name of the next hop interface.
1-255 An administrative distance of the route.
To Next Page
Loading...
Need help?
General
