show ip nat statistics
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
687
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP NAT STATISTICS
show ip nat statistics [<nat policy-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays detailed statistics for the NAT policies configured or for a
specific NAT policy.
PARAMETERS
EXAMPLE
The following example shows detailed statistics for the NAT policy ‘n1’
ALU# show ip nat statistics n1
ip nat n1
Dropped: 0, Bypassed: 0, Enqueued: 0
10 match any m1 source-nat host 1.1.1.1
Translated: 0, Bypassed: 0, PORTS Allocated: 0, Released: 0
20 match any m2 source-nat host 1.1.1.2
Translated: 0, Bypassed: 0, PORTS Allocated: 0, Released: 0
interface GigabitEthernet3/0 Out
Parameter Description
name NAT policy name.
To Next Page
Loading...
