Protocol Independent Features
Left running head:
Chapter name (automatic)
448
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SET COMMUNITY
set community {<1-4294967295>|AA:NN|additive|local-as|no-
advertise|no-export|none}
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
sets the community attribute.
PARAMETERS
DEFAULT VALUE
No BGP communities attributes exist.
EXAMPLE
ALU(config-route-map)# set community 10
Parameter Description
1-4294967295 Specifies the community number.
AA:NN Community number in aa:nn format.
additive Adds the community to the already existing communities.
local-as Routes with this community attribute is advertised to the
Local AS only.
no-advertise Routes with this community attribute is not advertised to any
router.
no-export Specifies that the routes with this community attribute will
not be advertised to any EBGP peer.
none Removes the community attribute from the prefixes that
pass the route map.
To Next Page
Loading...
Need help?
General
