Alcatel-Lucent OmniAccess 5740 - Auto Qos Voip; Bandwidth

auto qos voip
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
885
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
AUTO QOS VOIP
auto qos voip
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
enables Auto QoS VoIP on an interface.
PARAMETERS
None.
DEFAULT VALUE
None.
EXAMPLE
ALU(config-if Serial0/1:3)# auto qos voip
BANDWIDTH
bandwidth {<101-700000000>|percent <1-100>}
DESCRIPTION
This command is entered in the Class Mode. This command is used to configure
the bandwidth for a traffic class.
Note: You cannot mix the absolute bandwidth command with percentage bandwidth
command across policy hierarchy.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-pmap-P1-C1)# bandwidth 101
Parameter Description
101-700000000 The absolute bandwidth (bps) value.
1-100 The bandwidth in percentage.