IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
760
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CRYPTO CRL-CHECK STRICT
crypto crl-check strict
DESCRIPTION
This command is entered in the Configuration Mode. This command makes the
CRL policy strict. It ensures that if no CRL is present or if the CRL is already
expired, then no negotiation takes place until a new CRL is imported.
PARAMETERS
None.
EXAMPLE
ALU(config)# crypto crl-check strict
CRYPTO IKE DPD INTERVAL
crypto ike dpd interval <5-3600> [timeout <5-72000>]
DESCRIPTION
This command is entered in the Configuration Mode. This command configures
the DPD globally with the interval in seconds for which the keep-alive messages
will be sent, and the timeout in seconds after which the peer will be declared to be
dead.
PARAMETERS
DEFAULT VALUE
The default value for DPD timeout is three times that of the DPD interval specified.
EXAMPLE
ALU(config)# crypto ike dpd interval 10 timeout 35
Parameter Description
5-3600 Configures the keep-alive interval in
seconds for which the keep-alive
messages will be sent.
5-72000 Specify the time-out interval after which
the peer will be declared to be dead.
To Next Page
Loading...
Need help?
General
