passive-interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
573
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PASSIVE-INTERFACE
passive-interface {<interface-name>|default}
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
suppresses sending of routing update packets and OSPF hello packets through
the specified interface.
PARAMETERS
DEFAULT VALUE
Routing updates are sent on enabled interfaces.
EXAMPLE
ALU(config-router ospf 30)# passive-interface GigabitEthernet
3/0
Parameter Description
interface-name Interface name with its slot and port number.
default All interfaces become passive. The default keyword is
useful in Internet Service Providers (ISPs) and large
enterprise networks where the distribution routers have
more than 200 interfaces.
To Next Page
Loading...
Need help?
General
