Alcatel-Lucent OmniAccess 5740 - Clear Logging; Clear Session

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
52
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR LOGGING
clear logging
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
clears the contents of the logging buffer.
PARAMETERS
None.
EXAMPLE
ALU(config)# clear logging
CLEAR SESSION
clear session <session-id>
DESCRIPTION
This command is entered in the Configuration Mode. The command clears the
session corresponding to the AAA session ID provided. This can be used to clear
a misbehaving or an unnecessary session.
The session ID can be obtained from the ‘show aaa-users’ command.
PARAMETERS
EXAMPLE
ALU(config)# clear session 5
Parameter Description
session-id Clears the session corresponding to the
specified AAA session ID.