neighbor filter-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
515
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NEIGHBOR FILTER-LIST
neighbor {<ip-address>|<peer-group-name>} filter-list <1-199>
{in|out}
DESCRIPTION
This command is entered in the Router Configuration Mode. This command uses
AS-PATH access list to filter the updates from a specified neighbor.
PARAMETERS
DEFAULT
No filter is used.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 filter-list 1 in
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
1-199 Number of an AS path access list. You can define this
access list with the ip as-path access-list command.
in Access list to incoming routes.
out Access list to outgoing routes.
To Next Page
Loading...
