Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Generic Routing Encapsulation
Left running head:
Chapter name (automatic)
870
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO GRE-KEEP-ALIVE-INTERVAL
no gre-keep-alive-interval <1-3600>
This command is entered in the Configuration Mode. This command resets the
keepalive interval to its default. The default keepalive interval is 10 seconds.
NO GRE-KEEP-ALIVE-MAX-TRIES
no gre-keep-alive-max-tries <1-100>
This command is entered in the Configuration Mode. This command resets the
keepalive max tries value to its default. The default keepalive max-tries is 3.
NO SHUTDOWN
no shutdown
This command is entered in the Interface Configuration Mode. This command is
used to administratively bring up the tunnel interface.
NO TUNNEL DESTINATION
no tunnel destination {<ip-address>|<fqdn>}
This command is entered in the Interface Configuration Mode. The “no” command
removes the configured destination IP address or FQDN of the tunnel.
NO TUNNEL SOURCE
no tunnel source {<ip-address>|<interface-name>}
This command is entered in the Interface Configuration Mode. The “no” command
removes the configured source IP address of the tunnel.
SHUTDOWN
shutdown
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to administratively bring down the tunnel interface.
PARAMETERS
None.
EXAMPLE
ALU(config-if Tunnel7)# shutdown

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English