Alcatel-Lucent OmniAccess 5740 - No Include

no include
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
409
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO INCLUDE
no include <match-list name>
DESCRIPTION
This command is entered in the specific Match-list Configuration Mode. This
command is used to delete the match-list, that is included in another match-list.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# match-list m2
ALU(config-match-list-m2)# 1 tcp any any service ssh
ALU(config-match-list-m2)# 2 udp prefix 22.1.1.0/8 any
ALU(config-match-list-m2)# 3 include m1
Now, to delete the included match-list, use the ‘no include’ command:
ALU(config-match-list-m2)# no include m1
Parameter Description
match-list name Name of the match-list.