Alcatel-Lucent OmniAccess 5740 - Option Log Server

option log server
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
939
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
OPTION LOG SERVER
option log-server <ip-address>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the MIT-LCS UDP log server IP address to be used by the
clients.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option log-server 1.1.1.1
Parameter Description
ip-address IP address of the log server.