Point to Point Protocol
Left running head:
Chapter name (automatic)
304
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW PPP ALL STATISTICS
show ppp all statistics Serial <slot/port:channel>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays detailed statistics for PPP for a specified interface.
PARAMETERS
EXAMPLE
ALU# show ppp all statistics Serial 0/0:0
PPP data packets received: 0
PPP control packets received: 22
Packets dropped: 0
PPP sessions initiated: 1
PPP sessions received: 1
PPP sessions successful: 2
PPP sessions terminated: 1
IN OUT
LCP Configure Requests: 2 2
LCP Configure Acks: 2 2
LCP Configure Naks: 0 0
LCP Configure Rejects: 0 0
LCP Terminate Requests: 0 0
LCP Terminate Acks: 0 0
LCP Code Rejects: 0 0
LCP Protocol Rejects: 0 0
LCP Echo Requests: 4 4
LCP Echo Replies: 4 4
LCP Discard Requests: 0 0
LCP Invalid Packets: 0 0
IN OUT
IPCP Configure Requests: 4 2
IPCP Configure Acks: 2 2
IPCP Configure Naks: 0 2
IPCP Configure Rejects: 0 0
IPCP Terminate Requests: 0 0
IPCP Terminate Acks: 0 0
IPCP Code Rejects: 0 0
IPCP Invalid Packets: 0 0
Parameter Description
<slot/port:channel> Slot, port and channel group number of the
serial interface.
To Next Page
Loading...
