Intrusion Detection/Intrusion Prevention System
Left running head:
Chapter name (automatic)
850
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO INTRUSION SENSOR
no intrusion sensor <name> snort
This command is entered in the Firewall Configuration Mode. Use this command
to delete an intrusion sensor.
Note: You cannot delete the intrusion sensor if it is attached to a firewall policy. Detach the
sensor from the firewall policy before deleting it.
NO UPDATE
no update [{passive|rebuild}]
This command is entered in the Intrusion Snort Configuration Mode. Use this
command to remove the scheduled Snort rule database update.
REBUILD
rebuild <version-number>
DESCRIPTION
This command is entered in the Intrusion Snort Configuration Mode. Use this
command to manually rebuild the signature database.
PARAMETER
EXAMPLE
ALU(config-firewall-intrusion-snort)#rebuild 2.3.0
Parameter Description
version-number Version of the signature database.
To Next Page
Loading...
