Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

dhcp client
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
957
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
DHCP CLIENT
dhcp client <client-name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to attach a DHCP client object on an interface.
Note: At any given point of time, if a DHCP client object attached to an interface is modified,
the changes will not take effect automatically. For this, you need to reattach the DHCP
client object on the interface.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if GigabitEthernet3/0)# dhcp client client1
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
client-name DHCP client object name.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English