Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

default information originate (rip)
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
465
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
DEFAULT INFORMATION ORIGINATE (RIP)
default-information originate
DESCRIPTION
Enter the command in the Router Configuration Mode. This command is used to
generate default route into RIP.
PARAMETERS
None.
DEFAULT VALUE
Disabled.
EXAMPLE
ALU(config-router rip)# default-information originate
DEFAULT-METRIC
default-metric <1-16>
DESCRIPTION
A default metric helps to solve the problem of redistributing routes with
incompatible metrics. Whenever metrics do not convert, a default metric provides
a reasonable substitute and enables the redistribution to proceed.
Enter the command in Router Configuration Mode. This command sets the default
metric values of redistributed routes.
PARAMETERS
DEFAULT VALUE
The metric of redistributed connected and static routes is set to 0, otherwise
default metric is set to 1.
EXAMPLE
ALU(config-router rip)# default-metric 10
Parameter Description
1-16 Specify the default metric value.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English