transform-set
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
841
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
TRANSFORM-SET
transform-set <name>
DESCRIPTION
This command is entered in the IPsec Client Profile Configuration Mode. This
command is used to attach an already configured transform-set to an IPsec client
profile.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-client-prof-myclientprofile)# transform-set TS1
RELEASE HISTORY
Release 3.0: command was introduced in the Client Profile Configuraiton Mode.
Parameter Description
name Name of the transform set.
To Next Page
Loading...
