ping
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
87
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PING
ping [vrf <vrf-name>] {<ip-address>|<hostname>}
DESCRIPTION
This command is entered in the Configuration Mode. Use this command to check
the connectivity between OmniAccess 5740 USG and any remote machine.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU> ping 192.168.10.121
Sending 5,64-byte ICMP Echos to 192.168.10.121,
timeout is 10 seconds
!!!!!
Success rate is 100 percent (5/5),
round-trip min/avg/max = 0.124/0.191/0.356 ms
RELEASE HISTORY
Release 2.3: parameter vrf <vrf-name> was added.
Parameter Description
vrf-name If the VRF name is specified, the packets
will be routed using the routing table of
the specified VRF on a interface
associated with the VRF.
ip-address IP Address of the remote host.
hostname Name of the host.
To Next Page
Loading...
Need help?
General
