Alcatel-Lucent OmniAccess 5740 - Fair-Queue

fair-queue
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
889
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
FAIR-QUEUE
fair-queue
DESCRIPTION
This command is entered in the Class Mode. This command is used to enable fair
queue on the Default Class.
Note: You can enable or disable fair queue only on the Class Default.
Fair queuing is not applicable on hierarchical queuing.
PARAMETERS
None.
DEFAULT VALUE
None.
EXAMPLE
ALU(config-qos-P1-C1)# class class-default
ALU(config-qos-P1-class-default)# fair-queue