Router Information Protocol
Left running head:
Chapter name (automatic)
478
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PASSIVE-INTERFACE
passive-interface {<interface-name>|default}
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
disables the sending of routing updates on specified interfaces and controls the
set of interfaces with which to exchange routing updates.
PARAMETERS
DEFAULT VALUE
Routing updates are sent on the RIP enabled interface.
EXAMPLE
ALU(config-router rip)# passive-interface GigabitEthernet 3/0
Parameter Description
interface-name
Suppresses routing updates on the specified interface.
default
Suppresses routing updates on all interfaces.
To Next Page
Loading...
