Alcatel-Lucent OmniAccess 5740 - Show Firewall Attack System-Default

Filter and Firewall
Left running head:
Chapter name (automatic)
728
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW FIREWALL ATTACK SYSTEM-DEFAULT
show firewall attack system-default
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the attacks configured for the system default attack
object.
PARAMETERS
None.
EXAMPLE
ALU# show firewall attack system-default
attack system-default
udp-port-loopback 10 1000
udp-flood 200 1000
port-scan 5 1000
tcp-fin-scan - -
icmp-ip-address-sweep 100 1000
icmp-dest-unrch-storm 10 1000
icmp-ping-flood 100 1000
tcp-syn-flood 100 1000 5
udp-fraggle-attack - -
tcp-fin-no-ack - -
tcp-syn-fin - -
tcp-null-scan - -
tcp-invalid-urgent-offset - -
tcp-xmas-scan - -
ip-land-attack - -
icmp-echo-storm-attack - -
udp-short-header - -
tcp-header-frag - -
ip-zero-length - -
ip-tiny-frag 50 64
icmp-ping-of-death 50 65506
ip-tear-drop - -