Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip split-horizon
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
471
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP SPLIT-HORIZON
ip split-horizon [poison-reverse]
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
enables the split horizon mechanism.
PARAMETERS
.
DEFAULT VALUE
By default, split-horizon is enabled.
EXAMPLE
ALU(config-if GigabitEthernet3/0)#ip split-horizon
KEY
key <0-2147483647>
DESCRIPTION
This command is entered in the Key-chain Mode. This command is used to
configure a key.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-keychain allen)# key 100
ALU(config-keychain-key 100)#
Parameter Description
poison-reverse Enable poison-reverse on an interface.
Parameter Description
0-2147483647 Identity for the key in the range 0-2147483647.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English