System Configuration and Monitoring
Left running head:
Chapter name (automatic)
66
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
LINE VTY EXEC-TIMEOUT
line vty exec-timeout <0-35791> [<0-60>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the time-out (in minutes or seconds) for SSH, Telnet and Modem CLI
sessions. These sessions close if it is idle for the specified time. A zero input
specifies that the SSH, Telnet and Modem CLI sessions should never exit when
left idle.
PARAMETERS
DEFAULT VALUE
The default time-out is 20 minutes.
EXAMPLE
ALU(config)# line vty exec-timeout 0
ALU(config)# line vty exec-timeout 45 15
LIST CONFIG-FILES
list config-files
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
load a configuration file to the running configuration. This effectively leads to the
execution of all the commands in the given file. This file should be present in the
alu-config directory. (Use the copy commands to copy the file to the alu-config
directory.)
PARAMETERS
None.
EXAMPLE
ALU# list config-files
Permission Size Date modified Name
--------- ---- ------------- ------
-rw- 10464 Dec 26 15:25 my-config
-rw- 10461 Dec 25 08:13 startup-config
Parameter Description
0-35791 Time-out in minutes.
0-60 Time-out in seconds.
To Next Page
Loading...
