IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
794
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW CRYPTO IPSEC TRANSFORM-SET
show crypto ipsec transform-set [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays all the Transform-sets configured if the transform-set name is
not specified. If the Transform-set name is specified, it displays the details of the
specified transform-set.
PARAMETER
EXAMPLE
ALU(config)# show crypto ipsec transform-set
!crypto ipsec transform-set default
! esp-md5-des esp-sha1-des
crypto ipsec transform-set ts1 esp-md5-des
ALU(config)# show crypto ipsec transform-set ts1
crypto ipsec transform-set ts1 esp-md5-des
Parameter Description
name Name of the transform-set.
To Next Page
Loading...
