Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip dhcp option lease-time
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
929
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DHCP OPTION LEASE-TIME
ip dhcp option lease-time <1-315360000> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the time (in seconds) for which the clients can use the IP address
assigned to them.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option lease-time 1000250
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
1-315360000 Specify the time for which the clients can
use the IP address assigned to them.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English