Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

T1E1 Line Card
Left running head:
Chapter name (automatic)
246
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHUTDOWN
shutdown
DESCRIPTION
This command is entered in the Controller Configuration Mode on the E1
controller. The keyword “shutdown” will administratively bring down the controller.
This command when entered in the Interface Configuration Mode is used to
shutdown the interface. The keyword "no" will bring it up.
PARAMETERS
EXAMPLE
ALU(config-controller E1)# shutdown
ALU(config-if serial 0/0:0)# shutdown
Parameter Description
shutdown Shuts down the controller (when entered
in the controller configuration mode).
Shuts down the interface (when entered
in the interface configuration mode).

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English