show snmp user
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
131
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW SNMP USER
show snmp user <user-name>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the configuration of the configured SNMP users.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show snmp user
---------------------------------------
User Name : user123
Authentication Protocol: MD5
Security Level: Auth
---------------------------------------
RELEASE HISTORY
Release 2.3: command was added.
Parameter Description
user-name Name of the SNMP user. If the user
name is specified, the configuration for
the specified user is displayed.
To Next Page
Loading...
