Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip dhcp option dns-server
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
927
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DHCP OPTION DNS-SERVER
ip dhcp option dns-server <ip-address>
{primary|secondary|tertiary} [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the DNS IP address to be used by the clients.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option dns-server 1.2.2.2
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Release 3.0: Keywords {primary|secondary|tertiary}was added.
Parameter Description
ip-address IP address of the DNS.
primary|secondary|tertiary Specify the priority for the DNS.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English