Alcatel-Lucent OmniAccess 5740 - Clear Ip Bgp Peer-Group

clear ip bgp peer-group
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
507
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CLEAR IP BGP PEER-GROUP
clear ip bgp peer-group <peer-group-name> [ipv4 unicast]
[{in|out|soft [in|out]}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears IP BGP peer-group.
PARAMETERS
DEFAULT VALUE
By default, a reset is not initiated.
EXAMPLE
ALU#clear ip bgp peer-group p1
Parameter Description
peer-group-name Reset all current BGP sessions in the specified peer group.
ipv4 unicast Reset all current BGP sessions in the specified address
family.
in|out Triggers inbound or outbound update.
soft Triggers soft re-configuration.