policy-map
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
897
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
POLICY-MAP
policy-map <policy-map name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a policy map.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# policy-map P1
ALU(config-qos-P1)#
PRIORITY
priority
DESCRIPTION
This command is entered in the Class Mode. Configures the traffic class as a
priority class.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-qos-P1-C1)# priority
Parameter Description
policy-map name Name of the policy map.
Parameter Description
priority The second highest priority class.
To Next Page
Loading...
