request-type
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
963
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
REQUEST-TYPE
request-type {address|inform}
DESCRIPTION
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to configure the type of request the client should send to the
server.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config–dhcp-client-client1)# request-type address
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
address Specifies that the client should get the IP
address and the DHCP options from the
DHCP server.
inform Specifies that the client should request the
DHCP server to send only the DHCP
options and no IP address assignment.
To Next Page
Loading...
