show ip dhcp pools
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
953
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP DHCP POOLS
show ip dhcp pools [<pool-name>] [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows all the pools and their configured options.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show ip dhcp pools
Pool Name : p2
Pool Host Address : 1.2.3.66
Pool Host Mac Address : 11:22:aa:bb:55:ff
Pool Name : p1
Pool Network Number : 1.2.3.0
Pool Network Mask : 255.255.255.0
Number of leases : 50
Pool Range : 1.2.3.50 / 1.2.3.100
Boot-File Name : boot_image
ALU(config)# show ip dhcp pools p2
Pool Name : p2
Pool Host Address : 1.2.3.66
Pool Host Mac Address : 11:22:aa:bb:55:ff
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
pool-name Shows the details of only the specified
pool name.
vrf-name If the VRF name is specified, it displays
all the pools and their options configured
for the specified VRF. If the VRF is not
specified, it displays all the pools and
their options configured for the Default
VRF.
To Next Page
Loading...
Need help?
General
