Alcatel-Lucent OmniAccess 5740 - Debug Trace Firewall Intrusion Selector

Intrusion Detection/Intrusion Prevention System
Left running head:
Chapter name (automatic)
846
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEBUG TRACE FIREWALL INTRUSION SELECTOR
debug firewall
{session|filter|nat|attack|alg|intrusion|selector [saddr <ip-
address>|daddr <ip- address>|protocol <number> |sport
<number>|dport <number>][output|permanent]|all [detail-level]}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command turns on the debugging functionality for IDS/IPS on the OmniAccess
5740 USG.
PARAMETER
EXAMPLE
ALU# debug firewall intrusion
Parameter Description
saddr Source address.
daddr Destination address.
protocol Protocol number.
sport Source port.
dport Destination port.