debug firewall
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
709
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
DEBUG FIREWALL
debug firewall {session|filter|nat|attack|alg|intrusion|
selector [saddr <ip-address>|daddr <ip-address>|protocol
<number>|sport <number>|dport <number>][output|permanent]|all
[detail-level]}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command turns on debugging for specified firewall features and IDS/IPS. The
“selector” keyword allows you to debug only selected traffic.
PARAMETERS
EXAMPLE
The example below enables debugging for the source IP 10.91.0.52
ALU# debug firewall selector saddr 10.91.0.52
Parameter Description
saddr <ip-address> Source address.
daddr <ip-address> Destination address.
protocol <number> Protocol.
sport <number> Source port number.
dport <number> Destination port number.
To Next Page
Loading...
Need help?
General
