logging remote
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
71
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
LOGGING REMOTE
logging remote <ip-address> [port <0-65535>|priority {<0-7>|
alerts|critical|debugging|emergencies|errors|informational
|notifications|warnings}]
DESCRIPTION
This command is entered in the Configuration Mode. Use this command to
configure an external server to store log messages.
PARAMETERS
DEFAULT VALUE
The default port is 514 and the default priority level is 7.
EXAMPLE
ALU(config)# logging remote 1.1.1.1
LOGGING SYSTEM
logging system [<0-7>|alerts|critical|debugging|emergencies
|errors|informational|notifications|warnings]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
logs all the Kernel messages.
PARAMETERS
DEFAULT VALUE
By default, messages with a priority of 5 and lower will be logged.
EXAMPLE
ALU(config)# logging system
Parameter Description
ip-address IP address of the external log server.
0-65535 UDP port number of the external log
server.
0-7 Priority level of the messages.
Parameter Description
0-7 Priority level of the messages.
To Next Page
Loading...
Need help?
General
