Universal Serial Port (USP) Line Card
Left running head:
Chapter name (automatic)
264
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
INVERT TXC
invert-txc
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
inverts the transmit clock to correct phase shift between the clock and the data.
PARAMETERS
None.
DEFAULT VALUE
By default, the transmit clock is not inverted.
EXAMPLE
ALU(config-if Serial0/0)# invert-txc
LOOPBACK
loopback
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
configures an interface in the loopback mode.
PARAMETERS
None.
DEFAULT VALUE
None
EXAMPLE
ALU(config-if Serial0/0)# loopback