IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
810
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHUTDOWN
shutdown
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to administratively bring down the tunnel interface.
PARAMETERS
None.
EXAMPLE
ALU(config-if Tunnel1)# shutdown
TRANSFORM-SET
transform-set <name>
DESCRIPTION
This command is entered in the IPsec Profile Configuration Mode. This command
is used to attach an already configured transform-set to an IPsec profile.
PARAMETERS
DEFAULT VALUE
If no transform set is attached to an IPsec profile, ‘default’ transform set is used.
EXAMPLE
ALU(ipsec-profile-PF1)# transform-set TS1
Parameter Description
name
Name of the transform-set.
To Next Page
Loading...
