Alcatel-Lucent OmniAccess 5740 - Show Ip Ospf Route

Open Shortest Path First
Left running head:
Chapter name (automatic)
598
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP OSPF ROUTE
show ip ospf [<1-65535>] route
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the OSPF internal routing table.
PARAMETERS
EXAMPLE
ALU(config)# show ip ospf route
OSPF Router with ID (1.1.1.2) (Process ID 1)
Dest/Mask Type Adv-Rtr Cost Area/tag NextHop
2.0.0.0/8 Summ 1.1.1.2 20 0 0.0.0.0
1.1.1.0/24 Ext-2 0.0.0.0 20 0 1.1.1.2
2.0.0.0/8 Summ 1.1.1.2 20 0 0.0.0.0
2.2.2.0/24 Ext-2 0.0.0.0 20 0 2.2.2.2
45.5.5.0/24 Ext-2 0.0.0.0 20 0 0.0.0.0
ALU#
Parameter Description
1-65535 Process ID. If this argument is included,
only information for the specified routing
process is displayed.