Alcatel-Lucent OmniAccess 5740 - Show Firewall Alg Rpc-Portmap Statistics; Show Firewall Alg Rtsp Debug-Counters

Filter and Firewall
Left running head:
Chapter name (automatic)
746
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW FIREWALL ALG RPC-PORTMAP STATISTICS
show firewall alg rpc statistics
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the RPC-Portmap ALG statistics.
PARAMETERS
None.
EXAMPLE
ALU(config)# show firewall alg rpc statistics
Total SNAT RPC CALL Packets : 0
Total DNAT RPC REPLY Packets : 0
Total DNAT DUMP REPLY Packets : 0
Total Pinholes created : 0
Total Pinholes matched : 0
Total Pinholes failed : 0
Total Pinholes removed : 0
SHOW FIREWALL ALG RTSP DEBUG-COUNTERS
show firewall alg rtsp debug-counters
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the RTSP ALG debug counters.
PARAMETERS
None.
EXAMPLE
ALU(config)# show firewall alg rtsp debug-counters
Currently registered RTSP families : 0