Border Gateway Protocol
Left running head:
Chapter name (automatic)
500
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
BGP DEFAULT LOCAL-PREFERENCE
bgp default local-preference <0-4294967295>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
configures the default local preference value.
In the best path selection process, this attribute is used and route with highest
local preference will be selected. Route map has an option of ‘set local-
preference’. You can use this to selectively give preference to some routes over
the other.
PARAMETERS
DEFAULT VALUE
By default, local preference value is 100.
EXAMPLE
ALU(config-router bgp AS30)#bgp default local-preference 5000
BGP ENFORCE-FIRST-AS
bgp enforce-first-as
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode. If
you configure this command, router denies the updates received from EBGP peer
that does not add its AS number at the beginning of AS-Path in the incoming
update packets.
PARAMETERS
None.
DEFAULT VALUE
Disabled.
EXAMPLE
ALU(config-router bgp AS30)# bgp enforce-first-as
Parameter Description
0-4294967295 Specify the local preference value. Higher the value the
more preference it has.
To Next Page
Loading...
Need help?
General
