ip vrf forwarding
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
649
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP VRF FORWARDING
ip vrf forwarding <vrf-name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to associate a VRF on an interface.
Note: IP address configuration on the interface is removed when this command is executed.
Hence, associate a VRF to an interface prior to IP address configuration.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if GigabitEthernet3/0)# ip vrf forwarding ALU-vrf
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name The name of the VRF to be associated to an
interface.
To Next Page
Loading...
