Alcatel-Lucent OmniAccess 5740 - Option Next-Server

DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
940
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
OPTION NEXT-SERVER
option next-server <ip-address>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the next server in the bootstrap process to be used by the
clients.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-dhcp-pool-p1)# option next-server 1.1.1.2
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
ip-address IP address of the next server.