Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip rip {send|receive}
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
469
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP RIP {SEND|RECEIVE}
ip rip {send|receive} version [1] [2]
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to control the RIP behavior as to what version of RIP packets should be sent
or received on an interface.
You can override the RIP behavior configured on a per interface basis.
PARAMETERS
DEFAULT VALUE
Version 1 and Version 2 packets are received by default.
EXAMPLE
ALU(config-if GigabitEthernet3/0)#ip rip send version 1 2
Parameter Description
1 Accepts/sends RIP Version 1 packets on the interface.
2 Accepts/sends RIP Version 2 packets on the interface.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English