nhs
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
819
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NHS
nhs <ip-address>
DESCRIPTION
This command is entered in the Client Object Configuration Mode. This command
is used to configure the IP address of the NHS. This is the tunnel IP address of
the NHS.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-nhrp-alu-dmvpn)# nhs 192.168.1.1
RELEASE HISTORY
Release 3.0: command was introduced.
NO AUTHENTICATION
no authentication
This command is entered in the Configuration Mode. The “no” command removes
the authentication string.
NO HOLDTIME
no holdtime
This command is entered in the Client Object Configuration Mode. The “no”
command resets the holdtime to its default. The default holdtime for NHRP cache
is 7200 seconds.
Parameter Description
ip-address IP address of the NHS.
To Next Page
Loading...
Need help?
General
