Link Fragmentation and Interleaving (LFI)
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
385
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CHAPTER 21 LINK FRAGMENTATION AND
INTERLEAVING (LFI)
This chapter documents the Command Line Interface (CLI) commands for the
Link Fragmentation and Interleaving (LFI). These commands are used to
configure LFI on Multilink Point-to-Point Protocol (MLPPP) or Frame Relay (FR)
interface.
This chapter includes table of parameters, default values, and configuration
examples for LFI configurations as quick-start and reference information. In this
chapter, all the commands are described in alphabetical order. For more detailed
information about using and configuring LFI, refer to the OmniAccess 5740
Unified Services Gateway CLI Configuration Guide.
To Next Page
Loading...
