Alcatel-Lucent OmniAccess 5740 - Mlfr Lid; Mlfr Retry Count

Multilink Frame Relay
Left running head:
Chapter name (automatic)
334
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
MLFR LID
mlfr lid <name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
assigns a link identification (LID) name to the interface that is part of the bundle.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-if Serial0/0:0)# mlfr lid alu-wan-link
MLFR RETRY COUNT
mlfr retry-count <1-5>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
configures the retry count to the number specified.
PARAMETERS
DEFAULT VALUE
The default value of retry count is 2.
EXAMPLE
ALU(config-if Serial0/0:0)# mlfr retry-count 3
Parameter Description
name Link identification (LID) name that is
associated with the interface.
Parameter Description
1-5 Number that specifies the retry count.
The range for retry count varies from 1 to
5.