mep
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
357
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
MEP
mep <1-8191> direction {Down|Up} interface <name> [vlan <1-
4094>]
DESCRIPTION
This is entered in the OAM Domain Association Configuration Mode. This
command is used to create a MEP identifier (MEPID) within a Maintenance
Association. This enters MEP Configuration Mode.
Note: The MEP (source) should always be configured in the Down direction.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam-domain-assoc)# mep 1 direction Down interface
GigabitEthernet 3/0
ALU(config-oam-domain-assoc-mep)#
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
Down|Up Down: Indicates that the MEP receives
CFM PDUs (Protocol Data Unit) from,
and transmits them towards the direction
of the LAN.
Up: Indicates that a MEP residing in a
Bridge transmits CFM PDUs towards,
and receives them from, the direction of
the Bridge Relay Entity.
name Name of the interface.
1-4094 VLAN range.
To Next Page
Loading...
