crypto signed-cert
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
771
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CRYPTO SIGNED-CERT
crypto signed-cert <name> delete
DESCRIPTION
This command is entered in the Configuration Mode. This command deletes the
specified signed certificate.
PARAMETERS
EXAMPLE
ALU(config)# crypto signed-cert cert_Simpson delete
DPD INTERVAL
dpd {interval <5-3600> [timeout <5-72000>]|none}
DESCRIPTION
This command configures a DPD at the Crypto Map Configuration Mode. This
command allows all connections associated with a crypto map to use a DPD
policy that is different from the global policy.
PARAMETERS
DEFAULT VALUE
The default value for DPD timeout is three times that of the DPD interval specified.
EXAMPLE
ALU(config-crypto-map-map1)# dpd delay 15 timeout 60
ALU(config-crypto-map-map1)# dpd NONE
Parameter Description
name Name of the specified signed certificate.
Parameter Description
5-3600 Time in seconds for which the keep-alive
messages will be sent.
5-72000 Time in seconds after which the peer will
be declared to be dead.
none This keyword disables DPD for all the
connections associated with a crypto
map. These connections will not detect
Dead Peer.