Alcatel-Lucent OmniAccess 5740 - Ppp Authentication Password; Ppp Authentication Username

ppp authentication password
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
295
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PPP AUTHENTICATION PASSWORD
ppp authentication password <password>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
enables you to set a password for PPP authentication on the server side.
PARAMETERS
EXAMPLE
ALU(config-if Serial0/0:0)# ppp authentication password pass1
PPP AUTHENTICATION USERNAME
ppp authentication username <user-name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to set a user name for PPP authentication on the server side.
PARAMETERS
EXAMPLE
ALU(config-if Serial0/0:0)# ppp authentication username
alcatel-lucent
Parameter Description
password Denotes the password for PPP authentication.
Parameter Description
user-name Denotes the user name for PPP authentication.